MAME Cabinet

Fabrication Projects

MAME Cabinet
May 4, 2017 2015-2016,2016-2017,Student Work Student Demo

Mr. D asked for me to make my second box fully functional, and so I have been backing up my SD cards and retropie folder. This involves me using multiple flashdrives and I asked if I could borrow a flashdrive to take home to move more games back over. Today I informed Mr. D that
Details

2017 Clock Project
May 4, 2017 2016-2017,Student Work Student Demo

Today I started to figure out the gear design for my clock. I played around on GearGenerator.com and developed most of the gear work. The biggest challenge was figuring out the gear ratios and how I can get the proper RPM for each hand ( 1 RPM for the second, 1/60 RPM for the Minute,
Details

Camera Stabilizer | 2017
May 4, 2017 2016-2017,Student Work Student Demo

My next thoughts for my project are that I want to build a button on the right grip holder, so I can press it and the camera will automatically start recording. Currently online checking to see if there are DSLR camera buttons that are capable of doing this with the camera I have. Added straps
Details

Lacrosse Stick
May 4, 2017 2016-2017,Student Work Student Demo

This is the 3D printed version of my lacrosse stick. Obviously the height of the final product will be much longer (10.5 times longer specifically) but to 3D print that much would simply be a waste of time. However, the width, length, and shape of the 3D printed product will be the exact same as
Details

2017 Earphone holder and case project
May 4, 2017 2016-2017,Student Work Student Demo

1. I would like  to do this project because this is something that I think I could benefit from because it would prevent my headphones from tangling like they usually do. It takes a considerable amount of time to untangle my headphones when I take them out of my bookbag, but with an earphone holder
Details

2017 Infinity Mirror Project
May 4, 2017 2016-2017,Student Work Student Demo

I’ve decided to switch focus back to my original idea of an infinity mirror. Since we got back, I’ve edited my inkscape file for the mirror and today I transferred the file to the shop bot. It has actually been a lot more work than I expected to get to this point- I had to
Details

Kitchen Caddy
image January 27, 2017 Fab Fix,Student Work 20BOTCAR

Brian and I started off making our kitchen caddy by taking the salt, pepper, and napkins from the lunch room to measure them. We got measurements, so we could see how big we needed to make the whole caddy. We decided to split the caddy in half, and then we split one half into thirds,
Details