Category: 2016-2017

Bench Project
May 4, 2017 2016-2017,Student Work Student Demo

This is the final tinker cad of our bench. This is the wooden laser cut of our model. the next and last step is putting it into the woodcutter and arranging the pieces! this is the correct model of my bench with the correct scale.  I have uploaded the file to Corel draw and I’m
Details

3D Printed Parts for a Speaker
May 4, 2017 2016-2017,Student Work Student Demo

 As a part of Ian and Matt’s speaker project they asked me to help them print out two 9-Volt battery containers to hold the batteries inside the speaker. At first (as shown below) I took the dimensions of the battery provided and extended the inside of the box about a half of a millimeter more for
Details

H.U.N.C.H
May 4, 2017 2016-2017,Student Work Student Demo

Our school did an American Ninja Warrior type challenge which we built and designed for the school in two weeks. There were five obstacles: monkey bars, an a-frame wall, four balance beams, five step platforms, and a tunnel laced with rope. Our designs looked like this:     We spent about an hour and a
Details

Gpu Backplate Painting
May 4, 2017 2016-2017,Student Work 18mehlou

 I began experimented with painting methods when i applied spray paint to laser-cut acrylic. The idea being that I would etch out an area and then keep on the protective paper and spray paint so that the etched areas only would be painted. I found that it looks better when the surface is sanded down.
Details

2017 Infinity Mirror Project
May 4, 2017 2016-2017,Student Work Student Demo

I’ve decided to switch focus back to my original idea of an infinity mirror. Since we got back, I’ve edited my inkscape file for the mirror and today I transferred the file to the shop bot. It has actually been a lot more work than I expected to get to this point- I had to
Details

MAME Cabinet
May 4, 2017 2015-2016,2016-2017,Student Work Student Demo

Mr. D asked for me to make my second box fully functional, and so I have been backing up my SD cards and retropie folder. This involves me using multiple flashdrives and I asked if I could borrow a flashdrive to take home to move more games back over. Today I informed Mr. D that
Details

2017 Clock Project
May 4, 2017 2016-2017,Student Work Student Demo

Today I started to figure out the gear design for my clock. I played around on GearGenerator.com and developed most of the gear work. The biggest challenge was figuring out the gear ratios and how I can get the proper RPM for each hand ( 1 RPM for the second, 1/60 RPM for the Minute,
Details

Camera Stabilizer | 2017
May 4, 2017 2016-2017,Student Work Student Demo

My next thoughts for my project are that I want to build a button on the right grip holder, so I can press it and the camera will automatically start recording. Currently online checking to see if there are DSLR camera buttons that are capable of doing this with the camera I have. Added straps
Details

Lacrosse Stick
May 4, 2017 2016-2017,Student Work Student Demo

This is the 3D printed version of my lacrosse stick. Obviously the height of the final product will be much longer (10.5 times longer specifically) but to 3D print that much would simply be a waste of time. However, the width, length, and shape of the 3D printed product will be the exact same as
Details

2017 Earphone holder and case project
May 4, 2017 2016-2017,Student Work Student Demo

1. I would like  to do this project because this is something that I think I could benefit from because it would prevent my headphones from tangling like they usually do. It takes a considerable amount of time to untangle my headphones when I take them out of my bookbag, but with an earphone holder
Details