My halfway point is the picture that is embedded above. I’ve leaned to make exact measurements with rulers, exact cuts with the roller cutter, how to research exactly what I am looking for, I have designed my prototype with a little bit of design software, and a lot more. I struggled in the beginning to figure out what type of material I was going to use to create my stabilizer, and after my cardboard prototype I was considering thousands of different materials, but stumbled across PCP pipe, which ultimately made the most sense. My classmate gave me great feedback when we went over each others projects in the beginning of class and that allowed me to make ramifications, such as making shoulder straps for stability, 3D printing locks for the joints of the stabilizer, and a way to make it smaller than it was normally. It was easy to cut, measure, and is sturdy enough to hold a camera. I have luckily not hit any true roadblocks, but could be coming up on for how how I’m going to build something to hold the camera. I need to immediately start looking in to what exactly is going to hold my camera so that it is stable and what type of weights I will use for the balance. Some things I need to start thinking about are: what is going to make this product look nice, what type of paint should I use when it is done, and do all of the measurements make sense. An area that I may not be able to get to is developing a bluetooth start and stop button for my camera, so I do not have to refer to the module every time I want to start recording. So far, I’m satisfied with my progress and am excited to see what direction I am headed in.

• Measurements to be exact
• How to cut precisely, not to fast but not too slow
• How to draw lots and lots of prototypes before building one
• I have learned to use designing programs to help me get a grasp on certain things in my project
• How to research the exact thing I am looking for
• How to compare my design to other designs like it
• Time is definitely needed and you must work efficiently
• I’ve also learned to become more confident with the quality of my work
• How to give and receive helpful feedback

I decided to take the route of creating a square at the bottom of the stabilizer about the size of my camera so it would fit snuggly. My first model out of PVC pipe was perfect surprisingly and I decided to stick with it… All of the measurements added up and it looked nice.

I then began to play around with designing the holding plate that the camera would stick to in Inkscape. I decided to make it the exact size of the square bottom so it would fit right over top, put holes around the square for different attachments, and one hole in the middle for the universal screw. I had to print it two times to get it exactly how I wanted it out of cardboard and then printed it out of plastic. I am going to attach the plastic holding plate with zip ties so that it is easy to take off and put on the stabilizer. This idea also worked just to what I was hoping.

After I was set in stone with the final product, I decided to put screws in the PVC pipe exactly where I measure even points so that it would stay straight and I wouldn’t risk it moving during video shots.I also put a washer with the screw that attaches the camera so it would not crack and so it would be more tight to the stabilizer.

Once I was finally finished with the overall model, I wanted to spray paint it black so it did not look “cheap”. I spray painted on three coats of black spray paint and it looks very nice. The camera attaches perfectly and the balance in the videos I shoot with it are now steady and look very nice. I will attach a picture of the final product and a video below